Aero Rebuild Question

[ryanosaero]

I just bought a aero 125 and wanting to rebuild it but I got a few questions first due to me not having no experenice with these 2 stroke motors, I own a chinnesse 150cc scooter with the gy6 motor but I know nothing about these Honda motors so please excuse the dumb questions ahead of time.

1st: I purged the scooter of all fluids what is the best gear oil to use on these scoots.

2nd: what should the valves be set to on these.

3rd: Does the motor shroud need to be left on for normal operation or is it OK to be left off.

4th: The floor pedal/brake seems to be seized the best way to go about unsezing it.

And for the people who own these scooters any tips on rebuilding/ maintence or any thing that I may what to know on trying to get 1 of these running again?

[djtomy]

Aug 11, 2015 20:55:46 GMT -5 ryanosaero said:

I just bought a aero 125 and wanting to rebuild it but I got a few questions first due to me not having no experenice with these 2 stroke motors, I own a chinnesse 150cc scooter with the gy6 motor but I know nothing about these Honda motors so please excuse the dumb questions ahead of time.

1st: I purged the scooter of all fluids what is the best gear oil to use on these scoots.

2nd: what should the valves be set to on these.

3rd: Does the motor shroud need to be left on for normal operation or is it OK to be left off.

4th: The floor pedal/brake seems to be seized the best way to go about unsezing it.

And for the people who own these scooters any tips on rebuilding/ maintence or any thing that I may what to know on trying to get 1 of these running again?

1. 10w40 oil? or GL-4
2, Honda GN2 ONLY!!
3. I have mine off for sometime now doesn't seem to matter and I live in HOT FLorida
4. new brake cable, take off rear wheel see it drum is stuck on the pad.
5. there easy! I never rebuilt a motor in my life but this one (NH125) was simple, check here but, your actually better off in the forums at Motorscooterguide we are all there also.