recently got an aero 125
its in mint condition with 600 mi
completely serviced it it and it runs like new
i pulled the case off and pulled the variator
cleaned all grease from inside and rollers perfectly
belt is like new
clutch is perfect
changed final drive oil
i decided to use 80 gear oil synthetic 9had some left from my chevelle
Bad move the stuff is to thick to lube a system meant to use 30 weight motor oil.brakes are like new and not hanging up at all
when i go for a couple of mile ride the tire,rim,and case get very hot
Change the lube, you caused this and are costing yourself MPG and MPH. my tires are new and pressure is at 32
any ideas where the heat is coming from
my ch150 elite gets a little warm but not like this
mabye the heavier gear oil? i know it calls for 10-40
also a clue is it seems to have a flat spot accelerating between 25 and 40 at full throttle ,before and after that it pulls hard
thanks in advance