|
Post by djtomy on Oct 7, 2011 19:10:07 GMT -5
So I just bought this Aero 125 and I'm thinking someone mixed the oil into the gas because it was smoking alot when I got it. Now it seems right, dont see any smoke out the exhaust So I drained the oil res, put freash GN2 in and Checked the float the light goes on when empty. When I first turn it on the oil light does not come on and shut off like it does on my Aero 80. I checked the bulb its working. I checked the spark plug it looks darker (not lean)
So now Is there an oil pump?
How do I check to see if it's working or injecting oil into my motor?
Thanks
|
|
|
Post by bear4570 on Oct 7, 2011 20:57:37 GMT -5
|
|
|
Post by djtomy on Oct 23, 2011 0:09:08 GMT -5
Is the oil light suppose to come on when you first turn on the ignition then go off a few seconds later like my aero 80?
|
|
|
Post by bear4570 on Oct 23, 2011 13:09:23 GMT -5
Yes, well at least mine do on both the Aero 80's and 125's.
|
|
|
Post by djtomy on Nov 15, 2011 15:47:51 GMT -5
Do the signals beep the same too? (audible) I can hear the ones on the 125 but not on the 80..
|
|
|
Post by bear4570 on Nov 15, 2011 17:26:20 GMT -5
Do the signals beep the same too? (audible) I can hear the ones on the 125 but not on the 80.. I can't answer that, all the beepers went in to the junk box. What does the owners manual say?
|
|