|
|
Post by aero1984 on Apr 23, 2011 6:51:19 GMT -5
I was close to buy a polini speed control variator but if i bore the center of the variator to fit the variator boss it would work i think ,i will using the same machine that we use for piston to enlarge the hole.
|
|
|
|
Post by aeroguy50 on Feb 11, 2012 1:04:20 GMT -5
You would be better off machining down the OD of the pulley boss.
|
|
|
|
Post by aero1984 on Aug 16, 2012 21:24:19 GMT -5
years later ... i get it done by a machinist near i was dont know that cheap labor 9$ nice and work good!! 86km per hour on my gps ...faster than peugeot new viva 2010 of my wife!!(but my aero is tuned to the limit)
(brand new brake lol)
|
|
|
|
Post by bear4570 on Aug 17, 2012 16:05:10 GMT -5
Actually your best bet is to use the stock boss with the Polini variator.
|
|
