|
Post by bear4570 on Aug 15, 2010 23:55:30 GMT -5
|
|
|
Post by workdog on Aug 16, 2010 9:24:25 GMT -5
Nice! I have a rear tail light lenses if you need it.
|
|
|
Post by bear4570 on Aug 16, 2010 9:59:06 GMT -5
Yes, I do need it. Why don't you send it with the carb spacer. Let me know how much and I will Paypal you the funds. Thanks.
|
|
|
Post by bear4570 on Sept 14, 2010 23:37:18 GMT -5
The Aero 50 got back burnered due to finding almost all the parts I need for the Aero 125. I did tear off the body panels to find out why it wouldn't crank. Seems the morons didn't bother to look at a wiring diagram. Instead they just installed 3 switches and ran 12 volts to the first one and then to the start switch they installed and then the 12 volts to the starter solenoid. So now the solenoid has 12 volts to both sides of the starter solenoid coil. Gee, I wonder why it doesn't work? I have an ignition switch and I acquired a start and stop/run switch assembly which I will reinstall. I need to find the center lens for the combination light assembly, which is NLA. I also need the front turn signal lenses but can still get them from Honda. Carb has been off and is clean and reinstalled. Have new hoses for fuel and vacuum. The 50 is in line for right after the 125 is done.
|
|